Independent Roper repair
Roper Appliance Repair in Northern Virginia
Service for Roper's no-frills washers, dryers, ranges and refrigerators, built on the same platforms as the basic Whirlpool models of their day.
Booking online? The Roper model number in the form lets us check parts before we arrive.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
A few of the makes we service
Roper Repair for Owners, Renters and Landlords
Roper is Whirlpool Corporation's value label. The name comes from an Illinois stove maker, and in 1989 a settlement between Whirlpool and GE split things up: GE took Roper's factories, and Whirlpool got the brand. Since then, Roper appliances have been stripped-down versions of Whirlpool designs, sold with few features and a low price. We're not part of Whirlpool's service network, and any Roper still covered by the manufacturer should go to Whirlpool first. When the coverage has ended, we test the machine in your home, find the part that failed and quote the repair before touching anything.
How a Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Whirlpool underneath the badge
Open a Roper dryer and you'll find the same drum rollers, idler, belt, thermal fuse and element layout as a basic Whirlpool or Kenmore dryer of the same generation. The washers, ranges and refrigerators follow the same pattern. That's good news for owners, because the diagnostic procedures are well known and the parts are carried by nearly every appliance parts distributor.
The catch is that Whirlpool has changed platforms over the years, so a Roper from the 2000s and one from the 2020s can be very different inside. The model and serial number on the tag tell us which design we're dealing with.
Where a Roper usually sits
Roper appliances are bought mostly on price, so they tend to go into rental units, basement apartments, second laundry setups and homes being prepped for sale. In Northern Virginia that means garden apartments, rented townhouses and older ramblers whose basement laundry got a quick replacement when the old pair died. Military and federal households moving in and out on a schedule often inherit a Roper pair left behind by a previous owner.
An inherited machine brings its own questions: Was it installed correctly? Is the dryer vent sound? Are the washer hoses old rubber? We check those along with the fault you called about.
Repair, or let it go
Roper appliances are built to a price, so we're careful about the math. Belts, fuses, switches, pumps, igniters, couplers and thermostats are inexpensive and almost always worth replacing. A failed transmission on an old washer, a compressor or refrigerant leak on a refrigerator, or a rusted-out dryer drum is usually a signal to replace the appliance. We tell you which side of that line you're on before you pay for parts.
Roper products we see
- Refrigerators: Top-freezer Roper refrigerators with a dial control. We repair defrost failures, fan motors, start relays and leaks from a clogged drain tube.
- Washers: Top-load Roper washers, from older direct-drive machines to newer low-water models with a lid lock. Common problems are no spin, no drain, leaks and a noisy spin cycle.
- Dryers: Electric and gas Roper dryers built on Whirlpool's 29-inch platform. We handle thermal fuses, elements, igniters, belts, idler pulleys and drum rollers.
- Dishwashers: Built-in Roper dishwashers using Whirlpool parts. We fix drain problems, fill problems, leaks and poor washing.
- Ovens: The oven in Roper electric and gas ranges. We diagnose bake and broil elements, igniters, sensors and controls.
- Microwaves: Roper microwaves where a repair is sensible: door switches, fuses, turntable motors and fans. We'll tell you when a high-voltage fault means replacement.
- Freezers: Roper freezers in basements and garages. We check thermostats, compressor starting parts, fans, seals and the defrost system.
- Cooktops: The surface of a Roper range, mostly coil elements with some gas burners. We repair receptacles, infinite switches, coils and igniters.
- Stoves: Your Roper stove when a coil stays cold, a burner won't light, or the oven won't heat or hold temperature.
- Ranges: Freestanding 30-inch Roper ranges, electric coil and gas. Coils, terminal blocks, knob switches, igniters and oven sensors make up most of the work.
Parts for Roper
Roper appliances use Whirlpool part numbers, and the same components turn up in Whirlpool, Maytag, Amana and Kenmore machines of matching design. Distributors stock the common ones. When Whirlpool retires an old part number, a replacement number takes over, and it usually drops straight in. We order by the full model and serial number, use Whirlpool parts where they're available, and tell you if an equivalent part is going in instead.
Common Roper Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
Whirlpool Corporation. Whirlpool has owned the Roper name since 1989 and uses it for basic, lower-priced versions of its own designs.
In most cases, yes. Roper models share platforms with Whirlpool models of the same era, so the belts, pumps, fuses and switches are usually identical. We still confirm the part by the model and serial number.
It depends on what failed. Small parts like a belt, a fuse, a switch or a pump are well worth replacing. A failed transmission or compressor usually isn't. We give you the diagnosis and our honest opinion.