Kenmore microwave repair
Kenmore Microwave Repair in Ashburn, VA
Your Kenmore microwave is diagnosed in place at your Ashburn address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the kenmore microwave model number and your Ashburn address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
microwave brands we service
Kenmore Microwave Repair for Owners, Renters and Landlords
This page covers ZIP 20147. Kenmore has no connection to us, and an appliance still inside the Kenmore warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How a Microwave Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Kenmore Microwave Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Microwave Not Heating
- Sparking Inside
- Turntable Not Spinning
- Door Won't Close / Open
- Display Not Working
- Making Loud Noise
- Won't Start
- Sparking Inside Microwave
- Waveguide Cover Burned or Damaged
- Door Switch Failure
- Door Not Closing Properly
- Door Handle Broken
- Turntable Making Grinding Noise
- Control Panel Not Responding
- Runs with Door Open
- Noisy During Operation
- Cooling Fan Not Working
- Burns Food Too Quickly
- Microwave Won't Start
- Interior Light Not Working
- Over-Range Microwave Ventilation Poor
- Grease Filter Clogged
- Charcoal Filter Saturated
- Error Code Displayed
- Intermittent Heating
- Microwave Runs but No Magnetron Power
- Popping or Crackling Noise During Operation
- Overheating and Shutting Off
- Arcing from Metal Rack
- Fan Running After Microwave Is Off
- Some Display Digits Missing
- Sparking from Turntable Tray Area
- Food Heating Unevenly
- Clicking Sounds After Cooking
- Steam or Condensation Inside Microwave
- Burning Plastic Smell from Microwave
- Power Level Selection Not Working
- Inverter Board Failure (Inverter Microwaves)
- Interior Light Flickering
- Microwave Tripping Circuit Breaker
- Water or Moisture in Control Panel
- Error Code Indicating Thermal Fault
- Sensor Cooking Not Working Properly
- Child Lock Won't Disable
- Interior Cavity Coating Peeling
- Ventilation Fan Motor Failure (Over-Range)
- Arcing from Magnetron Antenna
- Runs Only a Few Seconds Then Stops
- Door Won't Latch Closed
- Runs at Wrong Power Level
- Keypad Buttons Sticking
- Vent Damper Stuck Closed or Open
- No Sound / No Beep
- Display Shows Wrong Time After Power Outage
- Grease Fire Risk — Heavy Grease Buildup
- Door Window Cracked
- Unusual Smell After Each Use
- Humidity Sensor Not Working (Sensor Cook)
- Door Seal / Gasket Damaged
- Convection Mode Not Baking Properly
Other Microwave Brands
Kenmore Appliances We Service
Kenmore Microwave Notes
Kenmore microwave repair across the Ashburn ZIP code we cover. We find the fault at your home and give you a price to approve before anything is done.
Ashburn went up quickly and largely all at once. Whole sections of Ashburn Village and Ashburn Farm were built within a few years of each other, so the builder's dishwashers, ranges, washers and refrigerators on a street reached old age together, and many have since been replaced one by one. Whatever is in the house now tends to live with an upstairs laundry and a second refrigerator in a garage that gets very hot in July.
On a Kenmore microwave, the checks run in this order: the three door switches first, because they are the part most likely to have quit and they also keep the magnetron from firing with the door open, so nothing else is tested until they check out. Worth knowing as well: once the real builder is known, a Kenmore gets the same tests and the same parts as that company's own models.
Call or book online, and we'll agree on a time together.
How a Kenmore microwave is put together
Many Kenmore over-the-range and countertop microwaves were built by LG, and the model prefix identifies the source. The most common complaint is a microwave that runs, lights and turns but doesn't heat, which is a high-voltage fault: magnetron, diode, capacitor or transformer. A unit that suddenly goes dead has usually blown its fuse, often because a door interlock switch failed. Over-the-range models also serve as the range hood, so they have a vent fan, grease filters and a cooktop light, and a vent fan that runs by itself usually means the unit's overheat sensor thinks the stove below is too hot. We discharge the capacitor before testing and compare the repair against a new unit.
Also: Kenmore began as a Sears label and never had factories of its own; the three digits before the dot in the model number name the maker, such as 106 for Whirlpool, 253 for Frigidaire and 795 for LG.
Where Kenmore microwaves tend to fail
The first things we check on this model line: No heat from a high-voltage fault; Door interlock switch failed; Vent fan running on its own; Blown line fuse; Turntable motor stopped.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the microwave sits in Ashburn
In Ashburn's planned communities the microwave is often a builder-era model at the age where igniters, elements and sensors wear out.
A builder-installed microwave in Ashburn is at the age where igniters, bake elements and sensors wear out; those are usually worthwhile repairs.
The microwave symptom that fools people
Whatever the brand, the microwave complaint most often misread is a microwave whose light, fan and turntable all run while the food stays cold, which looks terminal but usually means a failed magnetron, diode or capacitor rather than the control board.
The local factor to keep in mind in Ashburn, where most homes are planned-community houses and townhouses: over-the-range units that are the only hood above the cooktop in many condo and townhouse kitchens, and kitchens where the microwave shares a circuit and trips it.
How the visit works
The order never changes: diagnose, explain, price. Nothing is replaced until you've agreed to the figure.
You also get the reasoning in plain words: which part failed, why it probably failed, and what the fix involves. The decision stays with you, with everything laid out.
In Brief
Kenmore Microwave Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
If the warranty is still running, yes; the maker arranges covered repairs through its own network. We're an independent company and no brand's authorized service center, so we take the job in Ashburn once coverage ends or the fault falls outside it.
Usually, if we know ahead. Name each appliance that's misbehaving when you book the Ashburn visit, model numbers included, and the day is planned with room for all of them.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. The Kenmore name has been on machines from more than one manufacturer, so parts are ordered by the model number, never by the badge. If a part has to be ordered, you hear the lead time before you decide.