Frigidaire dishwasher repair
Frigidaire Dishwasher Repair in Reston, VA
Your Frigidaire dishwasher is diagnosed in place at your Reston address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the frigidaire dishwasher model number and your Reston address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
dishwasher brands we service
Frigidaire Dishwasher Repair for Owners, Renters and Landlords
This page covers ZIPs 20190 and 20191. Frigidaire has no connection to us, and an appliance still inside the Frigidaire warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How a Dishwasher Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Frigidaire Dishwasher Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Not Cleaning Properly
- Not Draining
- Door Won't Close
- Making Unusual Noise
- Not Filling with Water
- Leaking Water
- Dishwasher Won't Start
- Leaving Residue on Dishes
- Not Cleaning Dishes Well
- Not Filling with Water
- Overfilling with Water
- Leaking from Door
- Leaking from Bottom
- Soap Dispenser Not Opening
- Rinse Aid Not Dispensing
- Dishes Not Drying Properly
- Heating Element Failure
- Spray Arms Clogged
- Spray Arm Not Spinning
- Wash Pump Failure
- Drain Pump Failure
- Mineral Scale Buildup
- White Spots on Dishes
- Cloudy Glassware
- Dishwasher Smells Bad
- Drain Filter Clogged
- Door Latch Failure
- Control Board Failure
- Cycles Running Too Long
- Stopping Mid-Cycle
- Error Code Displayed
- Grinding Noise from Pump
- Humming but Not Starting Cycle
- Water on Floor Under Dishwasher
- Rust Inside Dishwasher Tub
- Rack Tines Rusting
- Top Rack Not Cleaning
- Bottom Rack Not Cleaning
- Touchpad Not Responding
- Door Spring Broken
- Fills and Immediately Drains
- Running Constantly / Cycle Won't End
- Detergent Tablet Not Dissolving
- White Deposits on Plastic Containers
- Dishwasher Interior Rusting
- Cloudy Film Inside Tub
- Glassware Permanently Etched
- FH / Water Inlet Error (Whirlpool/KitchenAid)
- Leak Detection System Tripped
- Air Gap Clogged
- Garbage Disposal Connection Problem
- Hard Food Disposer Failed
- Starting Intermittently
- Exterior Too Hot to Touch
- Steam Escaping from Door
- Built-In Water Softener Not Working
- Food Particles on Dishes After Washing
- Salt Indicator Light On
- Child Lock Activated and Stuck
- Poor Results After Switching Detergent
- Not Using Hot Water at All
- Three-in-One Dishwasher Tablet Not Working Properly
- Knocking During Wash Cycle
- High-Temperature Wash Not Working
- Delay Start Feature Not Working
- Burning Smell from Dishwasher
- Control Panel Getting Wet
- Spray Arm Spin Test Failed
- Bottom Spray Arm Missing or Broken
- Third Rack Not Cleaning (Third-Rack Models)
- Not Filling with Enough Water
- Sanitize Indicator Not Illuminating
- Spray Arm Hitting a Dish During Cycle
- Steam Wash Option Not Working
- Cycle Selector Knob Broken
Other Dishwasher Brands
Frigidaire Appliances We Service
Frigidaire Dishwasher Notes
Frigidaire dishwasher repair across all 2 Reston ZIP codes we cover. We find the fault at your home and give you a price to approve before anything is done.
Reston was drawn on paper before it was built, and appliance repair here still follows the drawing. Townhouses stand in clusters around shared parking and footpaths, condos rise by the lakes and the Metro, and almost every home answers to at least one association. The layout makes one problem more likely than elsewhere: a washer on the bedroom floor of a townhouse, whose leak first shows up on the living room ceiling underneath.
On a Frigidaire dishwasher, the checks run in this order: the water coming in, then the water going out, then the filter and the spray arms, because a poor wash is much more often a supply, drain or clogged-jet problem than a pump or motor failure. Worth knowing as well: Frigidaire's Gallery and Professional lines put different controls on common mechanical platforms, so ordering a board takes the complete model number.
Call or book online, and we'll agree on a time together.
How a Frigidaire dishwasher is put together
Frigidaire dishwashers use i-codes to point to the problem. i10 says the tub filled too slowly, and the cause might be the shutoff under the sink, a pinched supply tube or the inlet valve itself. i20 says water isn't leaving on time, so we look at the filter assembly, the drain loop and the disposal inlet, which on a newly installed disposal may still have its knockout plug in place. i30 means water has reached the base pan, often from a leak at a door seal or hose. Beyond codes, a dishwasher that won't latch or start may have a worn door latch. We clear the filter and check the supply and drain lines before replacing the pump or control.
Also: Frigidaire was a General Motors division until 1979 and has been an Electrolux brand since 1986, sharing a great deal of hardware with Electrolux-badged models.
Where Frigidaire dishwashers tend to fail
The first things we check on this model line: i10 slow fill from a half-shut valve; i20 drain restriction at the filter; i30 leak into the base pan; Door latch worn, cycle won't start; Circulation motor humming but not spinning.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the dishwasher sits in Reston
A dishwasher on the bedroom floor of a Reston townhouse sits above living space, so its hoses, drain and door seal get checked on every visit, whatever the original complaint.
An upstairs dishwasher in Reston should have braided hoses and, ideally, a drain pan; if a stain appears on the ceiling below, shut its water off first.
The dishwasher symptom that fools people
Whatever the brand, the dishwasher complaint most often misread is wet plastic and cool dishes at the end of a cycle, which is simply how most condensation-drying dishwashers, including many European ones, finish.
The local factor to keep in mind in Reston, where most homes are townhouses and high-rise condos: 24-inch dishwashers in condo and townhouse kitchens, drains that share a line with the sink or the unit above, and slow mineral buildup in the spray arms and on the heater.
Why the model number matters
Second trips in Reston almost always come down to a missing part. With the model number in hand we can look up that model's known weak spots and load the likely parts before leaving.
The label hides inside a door or lid, on the frame, behind the toe kick or on the back panel. Photograph it and attach the picture to your booking.
In Brief
Frigidaire Dishwasher Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
Yes, that's common in Reston. A tenant opens the door, the owner or manager says yes or no to the price by phone or email, and each of you gets the same written note of the fault and the fix. Buildings that want contractor paperwork should have their requirements sent to us at booking.
The brand, the model number and a sentence about what's wrong, plus any error code exactly as it appears. A photo of the rating label is even better; it's the surest way to arrive in Reston with the right parts the first time.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. Frigidaire is built on the Electrolux platform, and parts shared across that family are often still easy to find after a model is discontinued. If a part has to be ordered, you hear the lead time before you decide.