Kenmore stove repair
Kenmore Stove Repair in Springfield, VA
Your Kenmore stove is diagnosed in place at your Springfield address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the kenmore stove model number and your Springfield address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
stove brands we service
Kenmore Stove Repair for Owners, Renters and Landlords
This page covers ZIP 22150. Kenmore has no connection to us, and an appliance still inside the Kenmore warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How a Stove Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Kenmore Stove Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Not Igniting
- Burner Not Heating
- Gas Odor from Stove
- Uneven Heating
- Gas Burner Not Lighting
- Oven Section Not Heating
- Surface Element Not Heating
- Clock / Timer Not Working
- Control Panel Not Responding
- Oven Temperature Inaccurate
- Broiler Not Working
- Self-Clean Not Working
- Storage or Warming Drawer Not Working
- Stove Not Level
- Anti-Tip Bracket Not Installed
- Oven Door Problem
- Stove Moving When Using Oven Door
- Power Cord or Terminal Block Issue
- Burner Weak on One Side of Grate
- Oven Baking Lopsided
- Burner Indicator Light Stuck On
- Wrong Burner Igniting
- Yellow Flame on One Burner Only
- Oven Takes Long Time to Ignite
- Burner Cap Misaligned After Cleaning
- Broil Element Incorrect Position
- Gas Regulator on Stove Failing
- Pilot Light Out (Older Standing Pilot Stove)
- Thermocouple Failure
- No Power for Electronic Ignition
- Stove Top Porcelain Discolored
- Oven Temperature Knob Not Controlling Oven
- Burning Smell from Storage Drawer
- Burner Cap Cracked or Damaged
- Stove Top Surface Chipped or Cracked
- Broil Drawer Issue
- Gas Stove Will Not Self-Ignite at All
- Oven Not Responding to Controls
- Low Gas Pressure Affecting Stove Performance
Other Stove Brands
Kenmore Appliances We Service
Kenmore Stove Notes
Kenmore stove repair across the Springfield ZIP code we cover. We find the fault at your home and give you a price to approve before anything is done.
Springfield sits beside the Mixing Bowl, and it's close enough to Fort Belvoir and the NGA campus that many households here are on military or federal assignments. Those families move on a schedule, and that shapes appliance calls as much as the houses do: a washer that has to be working before a move-out walk-through, a refrigerator in a house between tenants, machines that came with a rental and belong to someone out of state.
On a Kenmore stove, the checks run in this order: which half has the trouble before anything else, then works through it: spark module, igniters and burner caps up top, or the bake element, sensor and door seal below. Worth knowing as well: Kenmore began as a Sears label and never had factories of its own; the three digits before the dot in the model number name the maker, such as 106 for Whirlpool, 253 for Frigidaire and 795 for LG.
Call or book online, and we'll agree on a time together.
How a Kenmore stove is put together
The freestanding Kenmore stove, gas or electric, is common in older kitchens and rental units, and most are Frigidaire or Whirlpool builds. They fail in familiar ways. On electric stoves, it's usually coil receptacles, a surface switch or a bake element. On gas stoves, a surface burner that won't light is typically ignition, and an oven that won't light is typically the hot-surface igniter. Loose knobs, missing drip bowls and a door that no longer closes square are common in rentals after years of turnover. Because these stoves are long-lived and inexpensive, we keep the math simple: fix the part that failed when it's a common part, and say so when it's a discontinued control.
Also: once the real builder is known, a Kenmore gets the same tests and the same parts as that company's own models.
Where Kenmore stoves tend to fail
The first things we check on this model line: Surface burner won't light; Oven igniter failing; Coil receptacle loose; Oven door hinge bent; Burner valve stiff or leaking.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the stove sits in Springfield
Some Springfield kitchens cook on Washington Gas and some on electricity; say which fuel your stove uses.
When the stove came with the rental, the owner normally approves the repair after seeing our findings.
The stove symptom that fools people
Whatever the brand, the stove complaint most often misread is clicking that won't stop, or a burner that won't catch, blamed on wiring when a boil-over has simply wet the igniter and the cure is cleaning and drying it.
The local factor to keep in mind in Springfield, where most homes are postwar houses and townhouses: gas stoves in older houses on flexible connectors that have served several appliances, and electric stoves in rental kitchens that change hands often.
Gas ranges, dryers and safety
Many kitchens and laundry rooms in Springfield run on natural gas from Washington Gas. When a gas oven or dryer won't light, the cause is usually an igniter, a sensor or a valve coil in the appliance, not the gas supply.
If you smell gas strongly, leave the switches alone, get out of the house and call the gas company or 911 from outside. We work on the appliance once it's safe, and every fitting we open is leak-tested afterwards.
In Brief
Kenmore Stove Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
No, because a symptom doesn't name its cause. A dryer that runs cold might need a fuse or an entire gas valve. The technician diagnoses it in your Springfield home, then quotes; you decide, and we'll tell you when the money would be better spent on a replacement.
48 of them, from everyday names such as Whirlpool, GE Appliances, Samsung, LG, Frigidaire and Maytag to built-in and European makers like Sub-Zero, Wolf, Thermador, Bosch and Miele, and commercial equipment from True, Hoshizaki, Manitowoc and others. The brands page has the full list.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. The Kenmore name has been on machines from more than one manufacturer, so parts are ordered by the model number, never by the badge. If a part has to be ordered, you hear the lead time before you decide.