Kenmore washer repair
Kenmore Washer Repair in Arlington, VA
Your Kenmore washer is diagnosed in place at your Arlington address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the kenmore washer model number and your Arlington address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
washer brands we service
Kenmore Washer Repair for Owners, Renters and Landlords
This page covers ZIPs 22201 and 22203. Kenmore has no connection to us, and an appliance still inside the Kenmore warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How a Washer Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Kenmore Washer Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Not Spinning
- Not Draining
- Making Loud Noise
- Won't Start
- Leaking Water
- Not Filling with Water
- Door Won't Lock
- Vibrating Excessively
- Error Codes Displayed
- Not Agitating
- Clothes Not Getting Clean
- Washer Smells Bad
- Mold in Drum or Gasket
- Musty Odor Transferring to Clothes
- Door Gasket Mold
- Not Rinsing Properly
- Too Much Suds / Oversudsing
- Detergent Not Dispensing
- Fabric Softener Not Dispensing
- Bleach Dispenser Clogged
- Spin Cycle Stopping Early
- Not Completing Full Cycle
- Cycle Taking Too Long
- Pausing Mid-Cycle
- Filling Too Slowly
- Overfilling with Water
- Standing Water After Cycle
- Not Draining Completely
- Grinding Noise During Wash
- Banging Noise During Spin
- Squealing Noise
- Clicking Noise During Cycle
- Burning Smell from Washer
- Door Won't Open After Cycle
- Door Glass Cracked or Broken
- Door Seal / Gasket Torn or Damaged
- Leaking from Bottom
- Leaking from Door
- Leaking from Back of Washer
- Leaking from Detergent Drawer
- Drum Not Turning
- Agitator Not Working
- Agitator Dogs / Cogs Worn Out
- Drum Bearing Making Noise
- Drive Belt Broken
- Motor Failure
- Drain Pump Failure
- Water Inlet Valve Failure
- Lid Switch / Lock Failure
- Control Board Failure
- Water Temperature Wrong
- Washing Cold Only / No Hot Water
- Clothes Getting Damaged in Washer
- Tearing or Ripping Clothes
- Clothes Coming Out Tangled
- Soap Residue on Clothes
- Fabric Softener Spots on Clothes
- Rust Stains on Clothes
- Washer Won't Turn On
- Display / Control Panel Not Working
- Buttons Not Responding
- Pausing Randomly During Cycle
- Tripping Circuit Breaker
- Shaking the Floor During Spin
- Washer Moving Across Floor During Spin
- Not Balancing Load During Spin
- UE / Unbalance Error (LG)
- OE / Drain Error (LG)
- LE / Motor Error (LG)
- DE / Door Error (LG)
- 5E / SE Drain Error (Samsung)
- F21 Drain Error (Whirlpool)
- F5 / dL Lid Lock Error (Whirlpool / GE)
- Drum Bearing Replacement Needed
- Shock Absorbers Worn Out
- Spider Arm / Drum Support Broken
- Pump Filter Clogged
Other Washer Brands
Kenmore Appliances We Service
Kenmore Washer Notes
Kenmore washer repair across all 2 Arlington ZIP codes we cover. We find the fault at your home and give you a price to approve before anything is done.
In this part of Arlington, a repair often begins at a front desk. Between Court House and Ballston a great many people live in towers where the washer and dryer are stacked in a closet, the refrigerator is framed in by cabinets, and the route to the kitchen runs through a garage, a lobby and an elevator. The other half of the work is a short walk away, in houses built between the wars, where the concern is more likely a basement drain older than anyone living upstairs.
On a Kenmore washer, the checks run in this order: the way water leaves the tub, then the way it enters, then the drive system, since a washer stuck full of water or refusing to spin is usually blocked at the pump rather than burned out at the motor. Worth knowing as well: Kenmore began as a Sears label and never had factories of its own; the three digits before the dot in the model number name the maker, such as 106 for Whirlpool, 253 for Frigidaire and 795 for LG.
Call or book online, and we'll agree on a time together.
How a Kenmore washer is put together
Kenmore top-loaders with a 110 prefix are Whirlpool machines, and the older direct-drive ones are about as repairable as washers get: a worn motor coupler, a lid switch or a pump usually explains why they stopped agitating, spinning or draining. Newer 110 top-loaders use a lid lock and a shift actuator that switches the drive between wash and spin, and those fail in their own recognizable ways. The 796 front-loaders are LG designs with a direct-drive motor and a door lock, and drain codes on them usually lead to the pump filter at the bottom front. On any front-loader, a torn door boot or a musty smell is common, and a grinding spin points to bearings. We check hoses and the drain on upstairs and basement installs alike.
Also: two Kenmores that look alike on the outside may share nothing inside, so no part can be picked from the badge alone.
Where Kenmore washers tend to fail
The first things we check on this model line: Motor coupler broken on direct-drive top-loaders; Lid lock or lid switch failure; Shift actuator stuck in wash or spin; Drain pump clogged on front-loaders; Door boot torn or moldy.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the washer sits in Arlington
When a washer leaks in one of Arlington's condo towers, the water heads for the unit below. We tighten and watch every fitting we disturb before leaving.
Managers of Arlington's buildings take washer leaks seriously because the water ends up next door or below. Every connection we touch is closed off and rechecked before we go.
The washer symptom that fools people
Whatever the brand, the washer complaint most often misread is an error code taken as proof that an expensive part has died, when the washer is only reporting a condition such as an unbalanced load, a supply valve left half closed, or a drain hose pushed so deep into its standpipe that it siphons.
The local factor to keep in mind in Arlington, where most homes are high-rise condos and garden apartments: washers on upper floors of townhouses, where a leak reaches the ceiling below, stacked pairs in tight condo closets, and front-loader door seals that grow mildew in a humid summer.
Upstairs washers and water damage
A washer that walks on spin can pull its own hoses loose, and on an upper floor that's how small problems become ceiling repairs. Leveling the feet and checking the suspension stop most of the movement.
If you ever find a damp spot under the washer, don't wait for it to spread. The source is usually small and easy to fix while it's still small.
In Brief
Kenmore Washer Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
A little. Most repairs are done where the machines stand, and around Arlington laundry is usually in a hall closet holding a stacked washer-dryer in the condo towers, a shared laundry room in the older garden-apartment buildings, and the basement of the detached houses. If the machines are upstairs, in a tight closet or behind a finished wall, mention it when you book so we can plan for anything that has to be moved.
Many refrigerators are designed for a room kept at household temperatures, and a closed garage in Arlington runs much hotter in July. The compressor then runs almost without stopping and a dusty condenser makes it worse. The manual lists your model's rated range, and we check whether it's the location or a fault before quoting anything.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. The Kenmore name has been on machines from more than one manufacturer, so parts are ordered by the model number, never by the badge. If a part has to be ordered, you hear the lead time before you decide.