In-home repair in Northern VirginiaCall now
Kenmore logo

Kenmore washer repair

Kenmore Washer Repair in Falls Church, VA

Your Kenmore washer is diagnosed in place at your Falls Church address. You learn which part failed and what the fix costs before anything is repaired.

Price approved before workParts matched to the model numberParking and building access noted at booking
(571) 725-1999

Booking online? Include the kenmore washer model number and your Falls Church address so parts can be checked ahead of the visit.

Book a Repair VisitStep 1 of 2

Step one covers the appliance; step two, your contact details. We follow up to book the visit.

01 The job
02 Your details
Property
01Property
Where
02Where
The appliance
03The appliance

Rather call? (571) 725-1999

washer brands we service

Samsung logoLG logoWhirlpool logoGE logoBosch logoMaytag logoFrigidaire logoElectrolux logoKenmore logoAmana logoSpeed Queen logoMiele logoFisher & Paykel logo
TrueFix Virginia

Kenmore Washer Repair for Owners, Renters and Landlords

This page covers ZIPs 22042 and 22043. Kenmore has no connection to us, and an appliance still inside the Kenmore warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.

Stacked & closet laundry
Townhouses and condos often put a stacked washer-dryer in an upstairs closet, so a small drip can end up staining the room underneath. Tell us where the machines sit.
Condo & high-rise rules
Many managed buildings ask for a certificate of insurance, a reserved freight elevator or set work hours. Check with yours and pass the rules along when you book.
Parking & access
Visitor spaces, garage clearance, gate codes and front-desk sign-in all shape a visit. Mention them at booking so nothing holds up the diagnosis.
Rentals & landlords
A tenant can book the visit. We report the fault and the price to the owner or property manager, who signs off before any work starts.
Garages, heat & humidity
A garage fridge or freezer can struggle through a hot, humid summer or a hard cold snap without any part failing. Check the temperature range in its manual.
Straight answers
When an older appliance isn't worth repairing, we say so and explain exactly which part failed.

How a Washer Repair Visit Works

01

Tell Us What's Wrong

Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.

02

Diagnosis at Your Home

The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.

03

A Price Before Work

We name the failed part and give you the cost of fixing it. Work starts only after you agree.

04

Repair and Check

The part is installed and the appliance is run through a cycle so you can watch it working.

Kenmore Washer Symptoms

One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.

  • Not Spinning
  • Not Draining
  • Making Loud Noise
  • Won't Start
  • Leaking Water
  • Not Filling with Water
  • Door Won't Lock
  • Vibrating Excessively
  • Error Codes Displayed
  • Not Agitating
  • Clothes Not Getting Clean
  • Washer Smells Bad
  • Mold in Drum or Gasket
  • Musty Odor Transferring to Clothes
  • Door Gasket Mold
  • Not Rinsing Properly
  • Too Much Suds / Oversudsing
  • Detergent Not Dispensing
  • Fabric Softener Not Dispensing
  • Bleach Dispenser Clogged
  • Spin Cycle Stopping Early
  • Not Completing Full Cycle
  • Cycle Taking Too Long
  • Pausing Mid-Cycle
  • Filling Too Slowly
  • Overfilling with Water
  • Standing Water After Cycle
  • Not Draining Completely
  • Grinding Noise During Wash
  • Banging Noise During Spin
  • Squealing Noise
  • Clicking Noise During Cycle
  • Burning Smell from Washer
  • Door Won't Open After Cycle
  • Door Glass Cracked or Broken
  • Door Seal / Gasket Torn or Damaged
  • Leaking from Bottom
  • Leaking from Door
  • Leaking from Back of Washer
  • Leaking from Detergent Drawer
  • Drum Not Turning
  • Agitator Not Working
  • Agitator Dogs / Cogs Worn Out
  • Drum Bearing Making Noise
  • Drive Belt Broken
  • Motor Failure
  • Drain Pump Failure
  • Water Inlet Valve Failure
  • Lid Switch / Lock Failure
  • Control Board Failure
  • Water Temperature Wrong
  • Washing Cold Only / No Hot Water
  • Clothes Getting Damaged in Washer
  • Tearing or Ripping Clothes
  • Clothes Coming Out Tangled
  • Soap Residue on Clothes
  • Fabric Softener Spots on Clothes
  • Rust Stains on Clothes
  • Washer Won't Turn On
  • Display / Control Panel Not Working
  • Buttons Not Responding
  • Pausing Randomly During Cycle
  • Tripping Circuit Breaker
  • Shaking the Floor During Spin
  • Washer Moving Across Floor During Spin
  • Not Balancing Load During Spin
  • UE / Unbalance Error (LG)
  • OE / Drain Error (LG)
  • LE / Motor Error (LG)
  • DE / Door Error (LG)
  • 5E / SE Drain Error (Samsung)
  • F21 Drain Error (Whirlpool)
  • F5 / dL Lid Lock Error (Whirlpool / GE)
  • Drum Bearing Replacement Needed
  • Shock Absorbers Worn Out
  • Spider Arm / Drum Support Broken
  • Pump Filter Clogged

Other Washer Brands

Samsung logoLG logoWhirlpool logoGE Appliances logoMaytag logoBosch logoFrigidaire logoKenmore logoAmana logoElectrolux logoMiele logoAdmiral logoASKO logoAvanti logoBlomberg logoFisher & Paykel logoHotpoint logoRoper logoSpeed Queen logo
Kenmore Washer · Falls Church

Kenmore Washer Notes

Kenmore washer repair across all 2 Falls Church ZIP codes we cover. We find the fault at your home and give you a price to approve before anything is done.

The Falls Church addresses on our map belong to Fairfax County, and most of the houses behind them were built in the rush of the early 1950s. Many started small. Since then a lot of them have been added onto, raised a story or replaced outright, so one street can put a tidy original rambler beside a new three-story house, and the appliances inside the two have almost nothing in common.

On a Kenmore washer, the checks run in this order: the way water leaves the tub, then the way it enters, then the drive system, since a washer stuck full of water or refusing to spin is usually blocked at the pump rather than burned out at the motor. Worth knowing as well: two Kenmores that look alike on the outside may share nothing inside, so no part can be picked from the badge alone.

Call or book online, and we'll agree on a time together.

How a Kenmore washer is put together

Kenmore top-loaders with a 110 prefix are Whirlpool machines, and the older direct-drive ones are about as repairable as washers get: a worn motor coupler, a lid switch or a pump usually explains why they stopped agitating, spinning or draining. Newer 110 top-loaders use a lid lock and a shift actuator that switches the drive between wash and spin, and those fail in their own recognizable ways. The 796 front-loaders are LG designs with a direct-drive motor and a door lock, and drain codes on them usually lead to the pump filter at the bottom front. On any front-loader, a torn door boot or a musty smell is common, and a grinding spin points to bearings. We check hoses and the drain on upstairs and basement installs alike.

Also: Kenmore began as a Sears label and never had factories of its own; the three digits before the dot in the model number name the maker, such as 106 for Whirlpool, 253 for Frigidaire and 795 for LG.

Where Kenmore washers tend to fail

The first things we check on this model line: Motor coupler broken on direct-drive top-loaders; Lid lock or lid switch failure; Shift actuator stuck in wash or spin; Drain pump clogged on front-loaders; Door boot torn or moldy.

Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.

Where the washer sits in Falls Church

When a washer moved during a remodel in Falls Church, its drain and supply were often extended. A drain hose pushed too deep into a new standpipe can siphon and look like a fault in the machine.

Managers of Falls Church's buildings take washer leaks seriously because the water ends up next door or below. Every connection we touch is closed off and rechecked before we go.

The washer symptom that fools people

Whatever the brand, the washer complaint most often misread is an error code taken as proof that an expensive part has died, when the washer is only reporting a condition such as an unbalanced load, a supply valve left half closed, or a drain hose pushed so deep into its standpipe that it siphons.

The local factor to keep in mind in Falls Church, where most homes are postwar houses and high-rise condos: washers on upper floors of townhouses, where a leak reaches the ceiling below, stacked pairs in tight condo closets, and front-loader door seals that grow mildew in a humid summer.

Garage refrigerators, summer and winter

Garage refrigerators around Falls Church have two hard seasons. In July, a closed garage can be far hotter than the kitchen a refrigerator was designed for, so the compressor barely rests; in a January cold snap, a model with one thermostat in the fresh-food section may hardly run at all, and its freezer softens.

The owner's manual lists the room-temperature range the model is rated for. If your garage falls outside it, a garage-ready model or a different spot may solve the problem better than any part.

In Brief

2
ZIP codes covered
Fairfax County
Local government
Varies by model
Kenmore platform family
Postwar houses and high-rise condos
Typical buildings
FAQ

Kenmore Washer Questions

Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.

Still have a question?

Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.

Yes, that's common in Falls Church. A tenant opens the door, the owner or manager says yes or no to the price by phone or email, and each of you gets the same written note of the fault and the fix. Buildings that want contractor paperwork should have their requirements sent to us at booking.

The brand, the model number and a sentence about what's wrong, plus any error code exactly as it appears. A photo of the rating label is even better; it's the surest way to arrive in Falls Church with the right parts the first time.

We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.

It's more likely if you send the model number when you book. The Kenmore name has been on machines from more than one manufacturer, so parts are ordered by the model number, never by the badge. If a part has to be ordered, you hear the lead time before you decide.

Call usBook