Maytag washer repair
Maytag Washer Repair in Fairfax & Vienna, VA
Your Maytag washer is diagnosed in place at your Fairfax & Vienna address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the maytag washer model number and your Fairfax & Vienna address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
washer brands we service
Maytag Washer Repair for Owners, Renters and Landlords
This page covers ZIPs 22030 and 22031 and 22180. Maytag has no connection to us, and an appliance still inside the Maytag warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How a Washer Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Maytag Washer Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Not Spinning
- Not Draining
- Making Loud Noise
- Won't Start
- Leaking Water
- Not Filling with Water
- Door Won't Lock
- Vibrating Excessively
- Error Codes Displayed
- Not Agitating
- Clothes Not Getting Clean
- Washer Smells Bad
- Mold in Drum or Gasket
- Musty Odor Transferring to Clothes
- Door Gasket Mold
- Not Rinsing Properly
- Too Much Suds / Oversudsing
- Detergent Not Dispensing
- Fabric Softener Not Dispensing
- Bleach Dispenser Clogged
- Spin Cycle Stopping Early
- Not Completing Full Cycle
- Cycle Taking Too Long
- Pausing Mid-Cycle
- Filling Too Slowly
- Overfilling with Water
- Standing Water After Cycle
- Not Draining Completely
- Grinding Noise During Wash
- Banging Noise During Spin
- Squealing Noise
- Clicking Noise During Cycle
- Burning Smell from Washer
- Door Won't Open After Cycle
- Door Glass Cracked or Broken
- Door Seal / Gasket Torn or Damaged
- Leaking from Bottom
- Leaking from Door
- Leaking from Back of Washer
- Leaking from Detergent Drawer
- Drum Not Turning
- Agitator Not Working
- Agitator Dogs / Cogs Worn Out
- Drum Bearing Making Noise
- Drive Belt Broken
- Motor Failure
- Drain Pump Failure
- Water Inlet Valve Failure
- Lid Switch / Lock Failure
- Control Board Failure
- Water Temperature Wrong
- Washing Cold Only / No Hot Water
- Clothes Getting Damaged in Washer
- Tearing or Ripping Clothes
- Clothes Coming Out Tangled
- Soap Residue on Clothes
- Fabric Softener Spots on Clothes
- Rust Stains on Clothes
- Washer Won't Turn On
- Display / Control Panel Not Working
- Buttons Not Responding
- Pausing Randomly During Cycle
- Tripping Circuit Breaker
- Shaking the Floor During Spin
- Washer Moving Across Floor During Spin
- Not Balancing Load During Spin
- UE / Unbalance Error (LG)
- OE / Drain Error (LG)
- LE / Motor Error (LG)
- DE / Door Error (LG)
- 5E / SE Drain Error (Samsung)
- F21 Drain Error (Whirlpool)
- F5 / dL Lid Lock Error (Whirlpool / GE)
- Drum Bearing Replacement Needed
- Shock Absorbers Worn Out
- Spider Arm / Drum Support Broken
- Pump Filter Clogged
Other Washer Brands
Maytag Appliances We Service
Maytag Washer Notes
Maytag washer repair across all 3 Fairfax & Vienna ZIP codes we cover. We find the fault at your home and give you a price to approve before anything is done.
Around here, 'Fairfax' needs a follow-up question: the city or the county? This area joins the City of Fairfax, the county land around it and George Mason University, Mantua and Merrifield, and the Town of Vienna. What holds it together is the housing, street after street of split-levels, ramblers and colonials from the 1950s through the 1970s, with the laundry a half-flight down and a kitchen that has usually been redone at least once since the house was new.
On a Maytag washer, the checks run in this order: the way water leaves the tub, then the way it enters, then the drive system, since a washer stuck full of water or refusing to spin is usually blocked at the pump rather than burned out at the motor. Worth knowing as well: Maytag's heavy-duty washers and dryers use stouter drive and suspension components than entry models, which keeps more of them worth repairing as they age.
Call or book online, and we'll agree on a time together.
How a Maytag washer is put together
Most Maytag washers we see are Whirlpool-platform top-loaders sold under the Commercial Technology name, including Pet Pro models. They lock the lid before spinning, use a shifter to swap between wash and spin, and rely on a drain pump that can be stopped by a coin or a sock. A machine that fills and washes but stalls at spin is often a lid lock or shifter fault, and the display usually confirms it with a code. Pet Pro models add a hair filter reservoir that, if ignored, slows draining. Front-loaders bring door boot mold, pump filters and bearing noise. Older Centennial and Bravos machines have their own drive quirks. We run the built-in service test to narrow it down before quoting.
Also: a Maytag from before the Whirlpool merger may need a part that's out of production, so on those we confirm supply before quoting anything.
Where Maytag washers tend to fail
The first things we check on this model line: Lid lock not confirming closed; Shift actuator stuck between modes; Pet Pro filter packed with hair; Drain pump jammed by a coin; Front-load tub bearings grinding.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the washer sits in Fairfax & Vienna
In Fairfax & Vienna's split-levels a washer often drains into a utility sink beside the water heater; when the sink backs up, the house line is as likely a culprit as the pump.
Four or five roommates in one Fairfax & Vienna house can wear out a washer's suspension and seals years ahead of schedule.
The washer symptom that fools people
Whatever the brand, the washer complaint most often misread is an error code taken as proof that an expensive part has died, when the washer is only reporting a condition such as an unbalanced load, a supply valve left half closed, or a drain hose pushed so deep into its standpipe that it siphons.
The local factor to keep in mind in Fairfax & Vienna, where most homes are postwar houses and garden apartments: washers on upper floors of townhouses, where a leak reaches the ceiling below, stacked pairs in tight condo closets, and front-loader door seals that grow mildew in a humid summer.
Humidity, dryers and door seals
Humidity works on refrigerators too. When a door gasket stops sealing, damp summer air pours in, frost builds on the evaporator and the cabinet sweats along the door edge.
Close a dollar bill in the door at several points and pull it out; if it slides free with no drag, the gasket isn't sealing there. A worn gasket is an inexpensive repair that saves the compressor a lot of work.
In Brief
Maytag Washer Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
The brand, the model number and a sentence about what's wrong, plus any error code exactly as it appears. A photo of the rating label is even better; it's the surest way to arrive in Fairfax & Vienna with the right parts the first time.
Yes, and plainly. When a fix would eat much of the price of a comparable new model and the unit is late in its life, we'll suggest you replace it rather than repair it, in Fairfax & Vienna or anywhere. Built-ins get more latitude, since a new one usually means new cabinetry too.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. Maytag is built on the Whirlpool platform, and parts shared across that family are often still easy to find after a model is discontinued. If a part has to be ordered, you hear the lead time before you decide.