Kenmore stove repair
Kenmore Stove Repair in Fairfax & Vienna, VA
Your Kenmore stove is diagnosed in place at your Fairfax & Vienna address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the kenmore stove model number and your Fairfax & Vienna address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
stove brands we service
Kenmore Stove Repair for Owners, Renters and Landlords
This page covers ZIPs 22030 and 22031 and 22180. Kenmore has no connection to us, and an appliance still inside the Kenmore warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How a Stove Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Kenmore Stove Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Not Igniting
- Burner Not Heating
- Gas Odor from Stove
- Uneven Heating
- Gas Burner Not Lighting
- Oven Section Not Heating
- Surface Element Not Heating
- Clock / Timer Not Working
- Control Panel Not Responding
- Oven Temperature Inaccurate
- Broiler Not Working
- Self-Clean Not Working
- Storage or Warming Drawer Not Working
- Stove Not Level
- Anti-Tip Bracket Not Installed
- Oven Door Problem
- Stove Moving When Using Oven Door
- Power Cord or Terminal Block Issue
- Burner Weak on One Side of Grate
- Oven Baking Lopsided
- Burner Indicator Light Stuck On
- Wrong Burner Igniting
- Yellow Flame on One Burner Only
- Oven Takes Long Time to Ignite
- Burner Cap Misaligned After Cleaning
- Broil Element Incorrect Position
- Gas Regulator on Stove Failing
- Pilot Light Out (Older Standing Pilot Stove)
- Thermocouple Failure
- No Power for Electronic Ignition
- Stove Top Porcelain Discolored
- Oven Temperature Knob Not Controlling Oven
- Burning Smell from Storage Drawer
- Burner Cap Cracked or Damaged
- Stove Top Surface Chipped or Cracked
- Broil Drawer Issue
- Gas Stove Will Not Self-Ignite at All
- Oven Not Responding to Controls
- Low Gas Pressure Affecting Stove Performance
Other Stove Brands
Kenmore Appliances We Service
Kenmore Stove Notes
Kenmore stove repair across all 3 Fairfax & Vienna ZIP codes we cover. We find the fault at your home and give you a price to approve before anything is done.
Around here, 'Fairfax' needs a follow-up question: the city or the county? This area joins the City of Fairfax, the county land around it and George Mason University, Mantua and Merrifield, and the Town of Vienna. What holds it together is the housing, street after street of split-levels, ramblers and colonials from the 1950s through the 1970s, with the laundry a half-flight down and a kitchen that has usually been redone at least once since the house was new.
On a Kenmore stove, the checks run in this order: which half has the trouble before anything else, then works through it: spark module, igniters and burner caps up top, or the bake element, sensor and door seal below. Worth knowing as well: Kenmore began as a Sears label and never had factories of its own; the three digits before the dot in the model number name the maker, such as 106 for Whirlpool, 253 for Frigidaire and 795 for LG.
Call or book online, and we'll agree on a time together.
How a Kenmore stove is put together
The freestanding Kenmore stove, gas or electric, is common in older kitchens and rental units, and most are Frigidaire or Whirlpool builds. They fail in familiar ways. On electric stoves, it's usually coil receptacles, a surface switch or a bake element. On gas stoves, a surface burner that won't light is typically ignition, and an oven that won't light is typically the hot-surface igniter. Loose knobs, missing drip bowls and a door that no longer closes square are common in rentals after years of turnover. Because these stoves are long-lived and inexpensive, we keep the math simple: fix the part that failed when it's a common part, and say so when it's a discontinued control.
Also: once the real builder is known, a Kenmore gets the same tests and the same parts as that company's own models.
Where Kenmore stoves tend to fail
The first things we check on this model line: Surface burner won't light; Oven igniter failing; Coil receptacle loose; Oven door hinge bent; Burner valve stiff or leaking.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the stove sits in Fairfax & Vienna
A stove in a postwar Fairfax & Vienna kitchen often sits on a gas stub or circuit meant for its predecessor, so we confirm the supply matches before blaming a part.
A pro-style stove in a rebuilt Fairfax & Vienna kitchen is made to be serviced; worn igniters, burner parts and hinges are ordinary upkeep.
The stove symptom that fools people
Whatever the brand, the stove complaint most often misread is clicking that won't stop, or a burner that won't catch, blamed on wiring when a boil-over has simply wet the igniter and the cure is cleaning and drying it.
The local factor to keep in mind in Fairfax & Vienna, where most homes are postwar houses and garden apartments: gas stoves in older houses on flexible connectors that have served several appliances, and electric stoves in rental kitchens that change hands often.
Repair or replace
Not every appliance should be saved. An old unit facing a repair bill that approaches the cost of a new one is usually better replaced, and we'll say that before you spend anything.
Built-ins tilt the other way, because a replacement drags cabinetry and counters into it. You'll get both paths laid out and choose.
In Brief
Kenmore Stove Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
Yes, and plainly. When a fix would eat much of the price of a comparable new model and the unit is late in its life, we'll suggest you replace it rather than repair it, in Fairfax & Vienna or anywhere. Built-ins get more latitude, since a new one usually means new cabinetry too.
We do. Restaurants, cafés and offices in Fairfax & Vienna call us for reach-ins, undercounter units, ice machines, and commercial ovens and ranges as well as home appliances, and we plan the visit around your service.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. The Kenmore name has been on machines from more than one manufacturer, so parts are ordered by the model number, never by the badge. If a part has to be ordered, you hear the lead time before you decide.