Hoshizaki ice maker repair
Hoshizaki Ice Maker Repair in Northern Virginia
In-home Hoshizaki ice maker repair across our Northern Virginia service area. KM crescent cubers, flakers and cubelet machines, air-cooled, water-cooled or with a remote condenser. Scale, float switches, water pumps, thermistors, hot gas valves and flaker gear motors are routine work.
Booking online? The Hoshizaki ice maker model number in the form lets us check parts before we arrive.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
ice maker brands we service
Hoshizaki Ice Maker Repair for Owners, Renters and Landlords
We are independent and have no tie to Hoshizaki. If the ice maker is still inside its Hoshizaki warranty, the manufacturer should be your first call. Once that coverage has ended, include the model number and the symptom in your booking so parts can be looked up ahead of the visit.
How an Ice Maker Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
How Hoshizaki designs its ice makers
A KM cuber grows ice as water trickles over a vertical stainless evaporator. A float switch in the reservoir tells the board when enough water has been frozen, and harvest begins: hot gas warms the plate while water flows behind it, and the crescent cubes drop into the bin. A thermistor on the evaporator outlet tells the board when harvest is done. One beep from the board generally means the evaporator ran too hot; two beeps mean harvest ran past its backup timer, often because the float, inlet valve or hot gas valve is sticking. Scale and slime cut production and misshape cubes. Flakers and cubelet machines rely on an auger and gear motor that wear with use. We read alarms, clean where needed, then test.
Common failure points on Hoshizaki ice makers
- Float switch stuck with scale
- Two-beep harvest backup alarm
- Water pump weak
- Evaporator thermistor out of range
- Flaker gear motor grinding
Your symptom isn't listed? Try the ice maker troubleshooting guide, which covers all brands.
Hoshizaki Ice Maker FAQ
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
Two beeps generally point to a harvest that ran longer than the backup timer allows. A sticking float switch, inlet valve or hot gas valve is common. We clean and test those parts.
No. Grinding usually means worn bearings or a failing gear motor, and running it can damage the auger and evaporator. Switch it off and book a visit.
Usually the machine needs cleaning or a new water filter. Scale on the evaporator and restricted water supply both cause it. If cleaning doesn't help, we test the water pump and refrigeration.