Sub-Zero ice maker repair
Sub-Zero Ice Maker Repair in Falls Church, VA
Your Sub-Zero ice maker is diagnosed in place at your Falls Church address. You learn which part failed and what the fix costs before anything is repaired.
Booking online? Include the sub-zero ice maker model number and your Falls Church address so parts can be checked ahead of the visit.
Step one covers the appliance; step two, your contact details. We follow up to book the visit.
ice maker brands we service
Sub-Zero Ice Maker Repair for Owners, Renters and Landlords
This page covers ZIPs 22042 and 22043. Sub-Zero has no connection to us, and an appliance still inside the Sub-Zero warranty period belongs with the manufacturer first. After that, send us the model number with your booking so parts can be checked ahead of the visit.
How an Ice Maker Repair Visit Works
Tell Us What's Wrong
Name the make, add the model number if it is handy, and describe the symptom. A picture of the label inside the door lets us check parts.
Diagnosis at Your Home
The technician tests the appliance along with its power, water, drain, gas or vent connections until the fault is confirmed.
A Price Before Work
We name the failed part and give you the cost of fixing it. Work starts only after you agree.
Repair and Check
The part is installed and the appliance is run through a cycle so you can watch it working.
Related Repairs
Other appliances, brands and service areas on the site.
Sub-Zero Ice Maker Symptoms
One symptom can have several causes, so the technician tests the likely parts on site and quotes only once the culprit is confirmed.
- Not Making Ice
- Making Small or Hollow Ice Cubes
- Leaking Water
- Ice Tastes or Smells Bad
- Overfilling with Ice
- Making Loud Noise
- Producing Too Little Ice
- Ice Clumping Together
- Water Leaking from Ice Maker
- Ice Not Dispensing
- Ice Has Bad Taste or Odor
- Producing Small or Hollow Ice Cubes
- Ice Cubes Appear Cloudy
- Ice Maker Overflowing Bin
- Drain Pump Failure
- Freezing Section Not Cold Enough
- Condenser Dirty Reducing Efficiency
- Water Inlet Valve Failure
- Ice Maker Freezing Up Internally
- Ice Maker Unit Won't Turn On
- Ice Bin Agitator Motor Failure
- Scale Buildup in Water Lines
- Ice Production Drops in Summer
- Ice Harvest Cycle Too Slow
- Water Pump Failure
- Evaporator Coil Iced Over
- Ice Cubes Inconsistent Size
- Water Reservoir Overflowing
- Control Board Failure
- Hot Gas Harvest Valve Failure
- Water Distribution Tube Clogged
- Not Making Cube Ice — Making Flakes Instead
- Nugget Ice Maker Not Producing Nuggets
- Ice Maker Tripping Circuit Breaker
- Ice Maker Needs Sanitizing
- Scale Buildup on Evaporator Plate
- Compressor Starting Problems
- Water Flowing Constantly into Ice Maker
- Ice Stuck in Mold / Won't Release
- Water Line Taste Affecting Ice
- Outdoor Ice Maker Problems
- Nugget Ice Maker Scale Buildup
- Ice Maker Smells Musty
- Not Reaching Rated Ice Production
- Ice Forming Outside the Bin
- Ice Maker Making Loud Operation Noise
- Ice Production Varies Seasonally
- Water Not Circulating Over Evaporator
- Slime or Mold Inside Ice Machine
- Error Code on Ice Maker Display
- Condensate Drain Clogged
- Not Stopping When Bin Is Full
- Portable Countertop Ice Maker Problems
- Repair or Replace an Aging Ice Maker
Other Ice Maker Brands
Sub-Zero Appliances We Service
Sub-Zero Ice Maker Notes
Sub-Zero ice maker repair across all 2 Falls Church ZIP codes we cover. We find the fault at your home and give you a price to approve before anything is done.
The Falls Church addresses on our map belong to Fairfax County, and most of the houses behind them were built in the rush of the early 1950s. Many started small. Since then a lot of them have been added onto, raised a story or replaced outright, so one street can put a tidy original rambler beside a new three-story house, and the appliances inside the two have almost nothing in common.
On a Sub-Zero ice maker, the checks run in this order: the supply line, then the fill valve and the filter, then the harvest parts, because small, hollow or cloudy cubes and low output nearly always trace back to water flow or mineral buildup. Worth knowing as well: the condenser on a Sub-Zero built-in sits behind a grille and collects dust, and cleaning it now and then is ordinary care rather than a sign of trouble.
Call or book online, and we'll agree on a time together.
How a Sub-Zero ice maker is put together
Sub-Zero ice comes from two very different machines. Full-size refrigerators have an automatic ice maker in the freezer, and when it stops, the fill tube is often frozen or the water valve isn't opening fully. A clogged water filter can also starve it. The UC-15I and UC-15IP are separate undercounter clear-ice machines: they freeze a batch of cubes at a time, then refill the reservoir and flush the leftover water, with its minerals, down the drain. That design depends on a working drain. The UC-15I relies on gravity, while the UC-15IP has a pump for installs without a floor drain. A slow drain or a failed pump floods the bin. Mineral scale on the evaporator slows production, and a bin sensor that misreads can stop production early.
Also: because a Sub-Zero is set into cabinetry with panels made to match, faults that would retire a freestanding refrigerator are routinely repaired.
Where Sub-Zero ice makers tend to fail
The first things we check on this model line: In-freezer fill tube frozen; Water valve opening only partway; Scale slowing UC-15I production; UC-15IP drain pump failed; Bin sensor ending cycles early.
Those are starting points, not a verdict. One symptom can trace to a cheap part or an expensive one, so the cause is confirmed at your home before you're quoted.
Where the ice maker sits in Falls Church
After a remodel in one of Falls Church's smaller postwar houses, a ice maker may be fed by a water line rerouted under the new floor. A line that kinks or freezes on an outside wall looks like a failed valve.
A ice maker whose ice maker went quiet after a Falls Church kitchen remodel may have a pinched or rerouted water line.
The ice maker symptom that fools people
Whatever the brand, the ice maker complaint most often misread is an ice maker written off as dead when the real cause is a line pinched behind the refrigerator, a filter long past its date, or a fill-valve screen closed over with scale.
The local factor to keep in mind in Falls Church, where most homes are postwar houses and high-rise condos: water lines rerouted under the floor during kitchen remodels, filters that go unchanged for years, and scale gathering in the fill valve.
Why the model number matters
A photo of the rating label settles the part numbers and the known weak spots for that model, and makes a one-visit repair much more likely.
Parts are matched to that model number. Where the maker still supplies the part we fit theirs, and if we fit an equivalent we tell you.
In Brief
Sub-Zero Ice Maker Questions
Brief answers to what customers most often ask us. Don't see yours? Ask when you call, or add it to the notes when you book online.
Still have a question?
Get in touch with the brand, the symptom and, if you can find it, the model number. Some things we can answer right away; others need a technician in front of the machine.
The brand, the model number and a sentence about what's wrong, plus any error code exactly as it appears. A photo of the rating label is even better; it's the surest way to arrive in Falls Church with the right parts the first time.
Yes, and plainly. When a fix would eat much of the price of a comparable new model and the unit is late in its life, we'll suggest you replace it rather than repair it, in Falls Church or anywhere. Built-ins get more latitude, since a new one usually means new cabinetry too.
We can't say until we know what failed. A valve, switch, pump or element costs far less than a control board or sealed-system work, and you get the actual figure after diagnosis, before any repair.
It's more likely if you send the model number when you book. Sub-Zero designs and builds its own platform, so the parts come through Sub-Zero's own supply. If a part has to be ordered, you hear the lead time before you decide.